How to Install a Vinyl Fence

You and your family will feel secure and private. Fences are also strong design elements that can define a home’s exterior appearance. It can be hard to install and maintain fences. Wooden fences can look beautiful but require a lot of maintenance. Some untreated lumber like cedar could be left as is to turn streaky and silver-gray. This can cause homeowners to dislike the look. PVC Fencing Jeffrey’s bay The neat look of painted fences gives your home a clean, tidy appearance. However, it can be difficult to paint them as they age.

That’s where vinyl fences come in. Vinyl fences are attractive, durable, low-maintenance and very attractive. Vinyl fences don’t need to be treated or painted because the vinyl has a color infused within it. They manage to keep their color from season to season, year to year.

How to build a vinyl fence

Vinyl fences depend on an interlocking part system. Upon purchase, you must make sure that you have all of the necessary components to form a complete kit. Vinyl fences don’t allow for any improvisation so make sure you have everything needed to complete the project.

Vinyl Picket Fences

PVC Fencing Port Elizabeth Vinyl picket fences are made with anchor pipes that are driven into the ground using a sledgehammer. Hollow posts are able to slide over the anchor pipes and act as sleeves. Two anchor pipes are used to create a section of fence panels: one rail on the bottom, one rail on the top and multiple pickets which run through the two rails.

Vinyl privacy fences

Taller, six-foot vinyl privacy fences’ posts must be anchored into the ground with concrete, like conventional four-by-four fence posts. These posts cannot slide over an anchor tube; they are directly sunk into the concrete. A fence panel is not made from separate pieces, but it comes pre-built.

Codes and Regulations

you might need to obtain an permit before you can build your fence. After the work is done, an inspector must inspect the site and close the permit. All work must comply with local building codes. You should also consider legal issues such easements as well as zoning. Your local permitting agency can give you advice on setback regulations and local zoning which affect fence construction.

When is Vinyl Fence Construction Best

It is difficult to drill the holes or drive the anchor pipe for a picket fence. Before you start construction, wait until the ground has thawed.

Fence-Building Safety

Call your Utility Locator when you dig on your land to locate any underground services, such as gas, water and electrical lines. PVC Fencing East London These services will have a color-coded spray coat that eventually wears away.

What You Will Need

Equipment / tools

  • Shovel or post-hole digger
  • Twine and wood stakes
  • Bubble level
  • Tape measure
  • Sledgehammer
  • Cordless drill
  • Circular saw

Materials

  • Vinyl picket fence or privacy fence
  • Quick-set concrete
  • Filler gravel

Leave a Reply

Your email address will not be published. Required fields are marked *